CTU in Prague, Faculty of Civil Engineering

Department of Concrete and Masonry Structures

Petr Stemberk


Office: B 721

Phone to office: +420-224-354-364
Fax to office:     +420-233-335-797

E-mail: arrow_is_at_stemberk->fsv.cvut.cz

Office Mail Address:
Department of Concrete and Masonry Structures
Faculty of Civil Engineering
Czech Technical University
Thakurova 7
166 29 Praha 6
Czech Republic
 

Education:

M.Sc. (Civil Engineering)
M.Sc. Thesis: Heat and Moisture Transfer in Concrete
Czech Technical University, Prague, Czech Republic
June 1998
 
Ph.D. (Civil Engineering)
Ph.D. Thesis: Fuzzy Set Theory - Applications
Czech Technical University, Prague, Czech Republic
September 2000/2003
 
D.Eng. (Civil Engineering, Architecture and Marine Technology)
D.Eng. Thesis: Evolutionary Material Model of Hardening Concrete under Uniaxial Loading
Yokohama National University, Yokohama, Japan
September 2003

Fields of Interest:

Theory of Fuzzy Sets in Material Modeling and Structural Design
Reliability Assessment
Experimental Investigation and Modeling of Concrete at Extremely Early Ages
Acceleration of Execution
Image-Analysis-Based Testing Methods
Automation in Construction
Effect of Ionizing Radiation on Concrete and Its Constitutents

Concrete Canoe:

BLUE LION 2010 (by Jan Kratochvil)
U3V.DUCHESS 2018 (by Stepan Sonka)
CANOE RACE 2018 (by Da Students)
CANOE RACE 2019 (by Dusni Gang)

Teaching:

          Betonove a zdene konstrukce V - 133BZKV

          Poruchy a rekonstrukce betonovych konstrukci - 133YPRK

          Failures and Rehabilitation of Concrete Structures

          Concrete and Masonry Structures for Water Management

Publications:

[1]

Kulhavy M., Stemberk P.: Nonlinear Model of Heat and Moisture Transfer - Computer Realization, Acta Polytechnica, Vol.39, No.2, Praha, pp.67-78, 1999.
[2] 

Hampel R., Stemberk P., Wagenknecht M.: On Fuzzy Arithmetic Operations, In: Proc. of MENDEL '99 - 5th International Conference on Soft Computing, Brno, Czech Republic, pp.299-304, 1999.

[3] 

 Stemberk P., Wagenknecht M.: Fuzzy Linear Equation Systems, CTU Reports, Vol.3, Praha, pp.95-112, 1999.

[4]

Stemberk P., Bittnar Z.: Fuzzy Model of Heat Transfer, Computational Concrete Structures Technology. Edinburgh: Civil-Comp Press, pp.119-124, 2000.

[5]

Stemberk P., Wagenknecht M.: Fuzzy Heat Transfer - Fast Computing Formulation, In: Proc. of East West Fuzzy Colloquium 2000 & 8th Zittau Fuzzy Colloquium, Zittau, Germany, pp.85-92, 2000.
[6]

Stemberk P.: Alternative Way of Material Modeling, In: East West Fuzzy Colloquium 2001 & 9th Zittau Fuzzy Colloquium, Zittau, Germany, pp.180-190, 2001.

[7]

Stemberk P., Tsubaki T.: Response of Solidifying Concrete in Penetration and Pullout Tests, In: Proc. of the 4th International Summer Symposium, JSCE, Kyoto, Japan, pp.271-274, 2002.

[8]

Stemberk P., Tsubaki T.: Creep of Solidifying Concrete at Various Load Levels, In: Proc. of Cement and Technology Conference, JCA, Tokyo, Japan, pp.188-189, 2003.
[9]

Stemberk P., Motoshige N., Tsubaki T.: Temperature Controlling System for Simulation of Temperature Effects in Hardening Concrete, In: Proc. of the 5th International Summer Symposium, JSCE, Tokyo, Japan, pp.289-292, 2003.

[10]

Stemberk P., Tsubaki T.: Modeling of Solidifying Concrete under One-Dimensional Loading, In: Proc. of JCI, Vol.25, No.1, pp.587-592, 2003.
[11]

Stemberk P., Tsubaki T.: Uniaxial Deformational Behavior and Its Modeling of Solidifying Concrete under Short-time and Sustained Loading, Journal of Applied Mechanics, JSCE, Vol.6, pp.437-444, 2003.

[12]

Stemberk P., Tsubaki T.: Lateral Deformation of Solidifying Concrete under Uniaxial Loading, In: Proc. of Annual Meeting, JSCE, CD-ROM 2p., 2003.

[13]

Stemberk P., Tsubaki T.: Modeling of Creep of Solidifying Concrete at Various Load Levels, Cement Science and Concrete Technology, No. 57, pp.223-230, 2003.

[14]

Stemberk P., Tsubaki T.: Effect of Excessive Load on Solidifying and Hardening Concrete, In: Proc. of CONSEC'04, Concrete under Severe Conditions: Environment & Loading, B.H. Oh et al. (eds), Seoul, Korea, Vol.1, pp.642-649, 2004.
[15] Stemberk P., Kruis J.: Modeling of Concrete Structures with Influence of Uncertainties, In: Proc. of Mathematical Modeling of Reliability with Engineering Applications, Ostrava, Czech Republic, p.15, 2004. (in Czech)
[16] Stemberk P., Kruis J.: Heat Transfer with Fuzzy Coefficients, In: Proc. of Engineering Mechanics 2004, Czech Republic, CD-ROM 7p., 2004.
[17] Stemberk P., Kruis J.: Material Model of Hardening Concrete with Uncertainties, In: Proc. of the Seventh International Conference on Computational Structures Technology, Lisbon, Portugal, pp.1-10, 2004.
[18] Stemberk P., Kruis J.: Dynamic Structural Analysis of 2D Frame with Fuzzy Coefficients, In: Proc. of The Third International Conference on Advances in Structural Engineering and Mechanics, Seoul, Korea, CD-ROM 8p., 2004.
[19] Stemberk P., Sipalova M., Kohoutkova A.: Comparison between Results of Analysis of Concrete Structure Obtained with Methods Based on Fuzzy Set Theory and Statistics, In: Proc. of Probability of Structural Failure, Brno, Czech Republic, pp.115-124, 2004. (in Czech)
[20] Stemberk P., Kruis J.: Alternative Description of Deformation of Frame Structure Subjected to Uncertain Loading, In: Proc. of Probability of Structural Failure, Brno, Czech Republic, pp.125-132, 2004. (in Czech)
[21] Stemberk P., Kruis J.: Response of Hardening Concrete to Short-time and Sustained Loading, In: Proc. of The International Conference Life Cycle Assessment, Behaviour and Properties of Concrete and Concrete Structures, Brno, Czech Republic, pp.366-371, 2004.
[22] Kruis J., Stemberk P.: On Engineering Interpretation of 2nd-Order Fuzzy Differential Equations of Free and Excited Vibration, In: East West Fuzzy Colloquium 2004 & 11th Zittau Fuzzy Colloquium, Zittau, Germany, pp.201-206, 2004.
[23] Stemberk P., Kruis J.: Fuzzy Dynamic Analysis of a 2D Frame, Acta Polytechnica, Vol.44, No.5-6, Praha, pp.117-121, 2004.
[24] Sipalova, M., Kruis, J., Stemberk P.: Application of Chen Model of Plasticity to Hardening Concrete, In: Proc. of Engineering Mechanics 2005, Czech Republic, CD-ROM 6p., 2005.
[25] Stemberk, P., Kruis, J., Bittnar, Z.: Fuzzy Dynamic Structural Analysis of Two-Dimensional Frame with Fuzzy Coefficients, In: Proc. of Engineering Mechanics 2005, Czech Republic, CD-ROM 8p., 2005.
[26] Tran, N.T., Stemberk P., Kohoutkova, A.: Method of Measuring Lateral Deformation of Solidifying Concrete under Uniaxial Loading, In: Proc. of Engineering Mechanics 2005, Czech Republic, CD-ROM 4p., 2005.
[26] Foglar, M., Stemberk, P.: Application of Creep Model for Hardening Concrete,In: Proc. of Rehabilitation - XV. International Conference, Brno, Czech Republic, pp. 319-327, 2005. (in Czech)
[27] Foglar, M., Stemberk, P.,  Kohoutkova, A.: History of Fatigue and Overview of Fatigue of Reinforced Concrete and Fibre Reinforced Concrete Structures, In: Proc. of 3rd International Conference Fibre Concrete 2005, Ostrava, Czech Republic, pp. 17-22, 2005. (in Czech)
[28] Foglar, M., Stemberk, P.,  Kohoutkova, A.: Methodology of Experimental Investigation of Concrete and Fiber Concrete under Fatigue Loading, In: Proc. of 3rd International Conference Fibre Concrete 2005, Ostrava, Czech Republic, pp.97-100, 2005. (in Czech)
[29] Frantova, M., Kruis, J., Stemberk, P.: Model of Hardening Concrete with Evolving Parameters, In: Proc. of Computational Plasticity VIII - Fundamentals and Applications, Barcelona, Spain, pp. 759-762, 2005.
[30] Kruis J., Stemberk P.: Fuzzification of Chen Model of Plasticity of Concrete, In: Proc. of Computational Plasticity VIII - Fundamentals and Applications, Barcelona, Spain, pp. 747-750, 2005.
[31] Stemberk, P., Kohoutkova, A.: Image-Analysis-Based Measuring of Lateral Deformation of Hardening Concrete, In: Materials Science. Vol.11, No.3, pp. 292-296, 2005.
[32] Stemberk, P., Kruis, J.: Fuzzy Dynamic Structural Analysis of 2D Frames, In: Proc. of the Tenth International Conference on Civil, Structural and Environmental Engineering Computing, Roma, Italy, pp. 1-13, 2005.
[33] Stemberk, P., Kruis, J., Kohoutkova, A.: Consideration of Uncertainty in Structural Design of RC Frame Subjected to Seismic Loading, In: Proc. of Asia-Pacific Conference on Risk Management and Safety 2005, Hong Kong, pp. 506-511, 2005.
[34] Stemberk, P., Tran, N.T.: Some Aspects of Image-Analysis-Based Measurement of Lateral Deformation of Hardening Concrete, In: Proc. of Experimental Stress Analysis 2005 - 43rd International Conference, Czech Republic, pp. 1-6, 2005.
[35] Tran, N.T., Stemberk, P.: Method for Investigation of Mechanical Parameters of Hardening Concrete under Uniaxial Cyclic Loading, In: Proc. of the 3rd International Conference on Dynamics of Civil Engineering and Transport Structures and Wind Engineering, Zilina, Slovakia, pp. 285-287, 2005.
[36] Stemberk, P., Foglar, M., Jakoubek, M.: Analysis of Mechanical Behavior of Tall RC Wall of Subway Station of IV.C2 Line during Concreting, In: Proc. of 12th Concrete Days, Hradec Kralove, Czech Republic, pp. 311-316, 2005.
[37] Frantova, M., Stemberk, P., Kruis, J.: Modeling of Plastic Behavior of Concrete, In: Proc. of 12th Concrete Days, Hradec Kralove, Czech Republic, pp. 335-339, 2005.
[38] Frantova, M., Vaskova, J., Stemberk, P.: Experimental and Numerical Investigation of Plastic Behavior of Concrete, In: Proc. of WORKSHOP 2006, Prague: CTU, Czech Republic, Vol. 2, pp. 618-619, 2006.
[39] Kohoutkova, A., Stemberk, P.: Application of Fuzzy Logic and Image Processing in Experiments with Hardening Concrete, In: Proceedings of The International Conference on Modeling and Simulation. Konya: Selcuk University Press, vol. 1, pp. 475-480, 2006.
[40] Kohoutkova, A., Stemberk, P.: Laboratory Curing System Simulating Conditions Inside Massive Concrete During Construction, In: Proceedings of International Conference on Modeling and Simulation 2006 [CD-ROM]. Kuala Lumpur: University of Malaya, pp. 754-757, 2006.
[41] Kruis, J., Stemberk, P.: Modelling of Interaction between Reinforcement and Matrix Using the FETI Method, In: Proceedings of the Eight International Conference on Computational Structures Technology. Stirling: Civil-Comp Press Ltd, pp. 291-292, 2006.
[42] Kruis, J., Stemberk, P.: Parallelization of Fuzzy Problems, In: Engineering Mechanics 2006 [CD-ROM]. Prague: Institute of Theoretical and Applied Mechanics AS CR, pp. 1-12, 2006.
[43] Monzon Hualde, I., Stemberk, P., Lojkasek, O.: Description of Material Properties of Hardening Concrete Inside Deck of Composite Bridge, In: Engineering Mechanics 2006. Prague: Institute of Theoretical and Applied Mechanics AS CR, pp. 120-121, 2006.
[44]
Stemberk, P., Kohoutkova, A.: A Tool for Experimental Analysis of Behavior of Solidifying Concrete Inside Massive Structures, In: Materials Science. vol. 12, no. 2, pp. 175-178, 2006.
 
[45]
Stemberk, P., Kohoutkova, A.: Method of Measuring Lateral Deformation of Hardening Concrete Specimen under Monotonous and Cyclic Loading, In: Ultragarsas. vol. 59, no. 2, pp. 36-39, 2006.
 
[46]
Stemberk, P., Kruis, J.: Fuzzy Approach to Solution of Civil Engineering Problems, In: Proceedings of The International Conference on Modeling and Simulation. Konya: Selcuk University Press, vol. 1, pp. 481-486, 2006.
[47]
Stemberk, P., Kruis, J.: Fuzzy Distribution of Internal Forces in Dynamically Loaded Structure, In: Engineering Mechanics. vol. 13, no. 4, pp. 241-248, 2006.
 
[48] Stemberk, P., Kruis, J.: Fuzzy-Set-Based Methodology for Assessment of Seismic Response of Structures, In: Proceedings of International Conference on Modeling and Simulation 2006 [CD-ROM]. Kuala Lumpur: University of Malaya, pp. 577-581, 2006.
[49]
Stemberk, P., Kruis, J.: Seismic Response of Structures with Uncertain Parameters, In: Proceedings of the Eight International Conference on Computational Structures Technology. Stirling: Civil-Comp Press Ltd, pp. 597-598, 2006.
 
[50]
Stemberk, P., Kruis, J., Bittnar, Z.: Fuzzy Distribution of Internal Forces in Seismically Loaded Frame Structure, In: Engineering Mechanics 2006 [CD-ROM]. Prague: Institute of Theoretical and Applied Mechanics AS CR, 99. pp. 1-9, 2006.
[51]
Stemberk, P., Lanska, N.: Heating System for Curing Concrete Specimens under Prescribed Temperature, In: Proceedings of East West Fuzzy Colloquium 2006 13th Zittau Colloquium. Zittau: IPM, pp. 82-88, 2006.
 
[52]
Stemberk, P., Tran, N.: Image-Analysis-Based Method for Measuring Lateral Deformation of Solidifying and Hardening Concrete, In: Advanced Testing of Fresh Cementitious Materials. Berlin: Deutsche Gesellschaft fuer Zerstoerungsfreie Pruefung e.V., pp. 203-211, 2006.
 
[53]
Tran, N., Stemberk, P., Kohoutkova, A.: Investigation of Poisson's Ratio of Early Age Concrete, In: Engineering Mechanics 2006 [CD-ROM]. Prague: Institute of Theoretical and Applied Mechanics AS CR, pp. 1-7, 2006.
 
[54]
Tran, N., Stemberk, P., Kohoutkova, A. : Measuring of Lateral Deformation of Hardening Concrete under Uniaxial Loading by Image-Analysis-Based Method, In: Mechanics of Composite Materials MCM 2006 [CD-ROM]. Riga: University of Latvia, pp. 204-205, 2006.
[55] Foglar, M., Štemberk, P. : Fatigue of Short-Span reinforced Concrete Bridges, In: Proceedings of Workshop 2007. Prague: CTU, pp. 536-537, 2007.
[56] Foglar, M., Štemberk, P. : Guidance on Fatigue of Concrete Bridges, In: Proceedings of Workshop 2007. Prague: CTU, pp. 630-631, 2007.
[57] Foglar, M., Štemberk, P. : Parametric Description of the Development of Secant Modulus of Elasticity of Concrete under Cyclic Loading, In: Engineering Mechanics 2007. Praha: Ústav termomechaniky AV ČR, vol. 1, pp. 63-64, 2007.
[58] Foglar, M., Štemberk, P. : Strain development under cyclic loading, In: Sanace 2007. Brno: Sdružení pro sanace betonových konstrukcí, pp. 432-438, 2007.
[59] Kohoutková, A., Frantová, M., Štemberk, P. : Investigation of Concrete Bridge Deck Behavior during Construction, In: The Fourth Civil Engineering Conference in the Asian Region [CD-ROM]. Taipei: The Asian Civil Engineering Coordinating Council, 5 p., 2007.
[60] Kruis, J., Štemberk, P. : Concrete-reinforcement Interaction Modelled by the FETI Method, In: Fibre Concrete 2007. Praha: Vydavatelství ČVUT, pp. 143-148, 2007.
[61] Kruis, J., Štemberk, P. : Imperfect Bond Modelled by the FETI Method, In: Computational Plasticity IX, Fundamentals and Applications [CD-ROM]. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), pp. 939-942, 2007.
[62] Kruis, J., Štemberk, P. : Modelling of Imperfect Bond between Composite Matrix and Reinforcement by the FETI Method, In: Engineering Mechanics 2007 [CD-ROM]. Prague: Institute of Thermomechanics, AS CR, v.v.i., pp. 141-142, 2007.
[63] Kruis, J., Štemberk, P. : Modelling of Imperfect Bond using the FETI Method, In: Proceedings of the Eleventh International Conference on Civil, Structural, and Environmental Engineering Computing [CD-ROM]. Stirling: Civil-Comp Press Ltd, pp. 61-62, 2007.
[64] Pokorná, N., Štemberk, P. : Performance of Heat Feedback System for Curing Concrete Specimens, In: AMSE 07 Italy [CD-ROM]. Lyon: AMSE Press, 4 p., 2007.
[65] Pokorná, N., Štemberk, P. : Zařízení pro pěstování betonových vzorků podle předepsané teplotní historie, In: In: Proc. of 14th Concrete Days. Prague: Czech Concrete Society, pp. 412-418, 2007.
[66] Procházka, J., Štemberk, P. : Concrete Structures 1, 1. ed. Prague: CTU Press, 218 p., 2007.
[67] Štemberk, P., Kohoutková, A. : Application of Fuzzy Logic and Image Processing in Experiments with Hardening Concrete, In: Best of Book 2006. Lyon: AMSE Press, vol. 2, pp. 139-149, 2007.
[68] Štemberk, P., Kohoutková, A. : Assessment of Mechanical Behavior of Structures Made of Recycled Materials, In: AMSE 07 Italy. Lyon: AMSE Press, 5 p., 2007.
[69] Štemberk, P., Kohoutková, A. : Method for Assessment of Mechanical Behaviour of Structures Made of Recycled Concrete, In: SB07 NZ [CD-ROM]. Auckland: BRANZ, 11 p., 2007.
[70] Štemberk, P., Krejčí, T., Kruis, J., Křístek, V. : Výpočet rozložení vlhkosti v porézních materiálech, In: BETON-technologie, konstrukce, sanace, no. 6, pp. 54-56, 2007.
[71] Štemberk, P., Kruis, J. : A Solution Method for Large Problems with Fuzzy Parameters, In: Proceedings of the Eleventh International Conference on Civil, Structural, and Environmental Engineering Computing [CD-ROM]. Stirling: Civil-Comp Press Ltd, pp. 61-62, 2007.
[72] Štemberk, P., Kruis, J. : Fuzzy Approach to Solution of Civil Engineering Problems, In: The Fourth Civil Engineering Conference in the Asian Region [CD-ROM]. Taipei: The Asian Civil Engineering Coordinating Council, 6 p., 2007.
[73] Štemberk, P., Kruis, J. : Fuzzy Dynamic Structural Analysis of two-dimensional Frame, In: Structural Engineering and Mechanics, vol. 25, no. 2, pp. 147-160, 2007.
[74] Štemberk, P., Kruis, J. : Fuzzy Solution of Civil Engineering Problems, In: Modern Building Materials, Structures and Techniques. Vilnius: VGTU Technika, vol. 3, pp. 1076-1083, 2007.
[75] Štemberk, P., Kruis, J. : Fuzzy-set Based Methodology for Assessment of Seismic Response of Structures, In: Best of Book 2006. Lyon: AMSE Press, vol. 1, pp. 110-119, 2007.
[76] Štemberk, P., Kruis, J., Frantová, M. : Analysis of Concrete Slab during Construction, In: Computational Plasticity IX, Fundamentals and Applications [CD-ROM]. Barcelona: International Center for Numerical Methods in Engineering (CIMNE), pp. 616-619, 2007.
[77] Štemberk, P., Pokorná, N., Kohoutková, A. : Heat Feedback System for Curing Concrete Specimens under Prescribed Temperature History, In: Proceedings of Workshop 2007. Prague: CTU, pp. 318-319, 2007.
[78] Tran, N., Štemberk, P. : Revised Technique for Measuring Lateral Deformation of Hardening Concrete by Image-Processing-Based Method, In: Proceedings of Workshop 2007. Prague: CTU, pp. 628-629, 2007.
[79] Tran, N., Štemberk, P., Kohoutková, A. : Experimental Analysis and Modeling of Hardening Concrete under Uniaxial Loading, In: Engineering Mechanics 2007. Praha: Ústav termomechaniky AV ČR, vol. 1, pp. 289-290, 2007.
[80] Milická, I., Dlask, P., Štemberk, P., Šejnoha, J. : KSIM - Effective Tool for Integrated Design and Project Management. Part I - Model with Unknown Elements, In: Stavební obzor, vol. 17, no. 2, pp. 45-49, 2008. (in Czech)
[81] Pokorná, N., Štemberk, P., Kohoutková, A. : Assessment of Using Recycled Concrete as Ordinary Building Material, In: BETON-technologie, konstrukce, sanace, no. 2, pp. 56-59, 2008. (in Czech)
[82] Štemberk, P., Kalafutová, P. : Early Entrance of Machinery on Cast Concrete Slab - Experimental Investigation and Modeling, In: Emerging Trends in Civil Engineering for Infrastructure Development [CD-ROM]. Raipur: National Institut of Technology Raipur, 10 p., 2008.
[83] Štemberk, P., Kalafutová, P. : Modeling Very Early Age Concrete under Uniaxial Short-time and Sustained Loading, In: Mechanika, vol. 70, no. 2, pp. 16-21, 2008.
[84] Štemberk, P., Kalafutová, P. : Model of Response of Early Age Concrete under Loading, In: BETON-technologie, konstrukce, sanace, no. 4, pp. 80-83, 2008. (in Czech)
[85] Štemberk, P., Pokorná, N. : Optimal Use of Recycled Concrete with Respect to Performance and Cost of Structure, In: Emerging Trends in Civil Engineering for Infrastructure Development. Raipur: National Institut of Technology Raipur, 9 p., 2008.
[86] Štemberk, P., Pokorná, N., Kohoutková, A. : Fuzzy-Logic-Based Definition of Stress-Strain Curve of Hardening Concrete, In: 15th Zittau East-West Fuzzy Colloquium. Zittau: Institut für Prozesstechnik und Messtechnik, pp. 228-233, 2008.
[87] Foglar, M., Štemberk, P. : Fatigue Damage Function and Its Experimental Verification, In: Engineering Mechanics 2008: CD ROM [CD-ROM]. Praha: Institute of Thermomechanics, Academy of Science CZ, pp. 223-231, 2008.
[88] Foglar, M., Štemberk, P. : Fatigue Damage Function - A Tool for Assessing The Increase of Deformations Due to Cyclic Loading, In: Bridges 2008. Brno: Sekurkon, pp. 191-195, 2008. (in Czech)
[89] Kalafutová, P., Štemberk, P. : Experimental Investigation of Response of Early Age Concrete to Uniaxial Short-time and Sustained Loading, In: Proceedings of Workshop 2008 [CD-ROM]. Praha: Czech Technical University in Prague, 2008.
[90] Kohoutková, A., Štemberk, P. : Fuzzy-logic-based Expert System for Proportioning of Concrete Composition, In: Proceedings of MS08 Jordan [CD-ROM]. Lyon: AMSE Press, pp. 111-114, 2008.
[91] Kohoutková, A., Štemberk, P., Pokorná, N. : Economic Aspect of Using Concrete with Recycled Aggregate as Ordinary Building Material, In: The Proceedings of 4th International Conference on Advances in Structural Engineering and Mechanics (ASEM'08) [CD-ROM]. Yusong: Techno-Press, pp. 2106-2115, 2008.
[92] Pokorná, N., Štemberk, P. : Economic Aspect of Using Recycled Concrete as Ordinary Building Material, In: Proceedings of the 13th International Conference Mechanika 2008. Kaunas: Technologija, pp. 422-426, 2008.
[93] Pokorná, N., Štemberk, P. : Fuzzy-logic-based Definition of Chen Model of Plasticity, In: Proceedings of MS08 Jordan [CD-ROM]. Lyon: AMSE Press, pp. 106-110, 2008.
[94] Pokorná, N., Štemberk, P. : Revised Feedback System for Curing Concrete Specimens under Prescribed Temperature, In: Proceedings of Workshop 2008 [CD-ROM]. Praha: Czech Technical University in Prague, 2008.
[95] Procházka, J., Hanzlová, H., Broukalová, I., Štemberk, P. : Concrete Structures - Examples, Prague: Czech Technical University in Prague, 173 p., 2008. (in Czech)
[96] Procházka, J., Hanzlová, H., Vašková, J., Štemberk, P., Broukalová, I. - et al. (ed.) : Concrete Structures - Textbook, 1st ed, Prague: Čzech Technical University in Prague, 214 p., 2008. (in Czech)
[97] Sýkorová, J., Foglar, M., Štemberk, P. : Fatigue of Reinforced Concrete Bridges with Influence of Deterioration of Concrete, In: Microstructure Related Durability of Cementitious Composites. Bagneux: Rilem Publications s.a.r.l., pp. 825-832, 2008.
[98] Sýkorová, J., Štemberk, P. : Calculation of Bridge Deflection with The Formularization of The Influence of Fatigue of Concrete, In: Proceedings of the 4th International Conference on Dynamics of Civil Engineering and Transport Structures and Wind Engineering. Žilina: Žilina University, pp. 169-172, 2008. (in Czech)
[99] Štemberk, P., Kalafutová, P. : Consequences of Very Early Loading of Concrete Slab by Truck Tire, In: The Proceedings of 4th International Conference on Advances in Structural Engineering and Mechanics (ASEM'08) [CD-ROM]. Yusong: Techno-Press, pp. 1559-1570, 2008.
[100] Štemberk, P., Kalafutová, P., Kohoutková, A. : Simulation of Truck Load on Hardening Concrete Slab, In: MS08 Port-Said [CD-ROM]. Lyon: AMSE Press, 2008.
[101] Štemberk, P., Pokorná, N. : Calculation of Cost Savings when Using Recycled Concrete, In: MS08 Port-Said [CD-ROM]. Lyon: AMSE Press, 2008.
[102] Doležel, V., Krejčí, T., Kruis, J., Křístek, V., Kuráž, V., Stemberk, P., et al. : Analysis of Moisture Transport in Porous Building Materials, Pardubice: Universita Pardubice, 124 p., 2008.
[103] Štemberk, P., Pokorná, N., Kohoutková, A. : Material Model of Hardening Concrete Based on Fuzzy Logic, In: Proceedings of MS08 Spain. Lyon: AMSE Press, 2008.
[104] Štemberk, P., Tomek, P., Kohoutková, A. : Modeling of Evolution of Concrete Stress-strain Diagrams with Respect to Various Parameters, In: Proceedings of MS08 Jordan [CD-ROM]. Lyon: AMSE Press, pp. 131-135, 2008.
[105] Pokorná, N., Štemberk, P. : Stress-Strain Diagram of Hardening and Fiber Concrete Defined by Fuzzy Logic, In: MECHANIKA 2009 - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE. Kaunas: Kauno technologijos universitetas, pp. 329-333, 2009.
[106] Štemberk, P., Semilský, P. : Analysis of Deformation of Bridge Structure During Construction, In: MECHANIKA 2009 - PROCEEDINGS OF THE 14TH INTERNATIONAL CONFERENCE. Kaunas: Kauno technologijos universitetas, pp. 390-395, 2009.
[107] Procházka, J., Štemberk, P. : Design Procedures for Reinforced Concrete Structures,1st. ed. Prague: Česká technika - publishing house of Czech Technical University in Prague, 190 p., 2009.
[108] Štemberk, P., Pokorná, N., Kohoutková, A. : Fuzzy Optimization of Structural Systems with Respect to Cost and Working Life, In: Advances in Modeling and Analysis C. 2009, vol. 64, no. 3-4, pp. 13-26.
[109] Štemberk, P., Pokorná, N., Kohoutková, A. : Applicability of Fuzzy Logic to Definition of Stress-strain Diagram of Fibre Concrete, In: Advances in Modeling and Analysis C. 2009, vol. 64, no. 3-4, pp. 1-12.
[110] Štemberk, P., Kohoutková, A. : Applicability of Fuzzy-logic-based Material Model of Hardening Concrete, In: The Proceedings on the First International Conference on Computational Technologies in Concrete Structures [CD-ROM]. Daejeon: Korea Advanced Institute of Science and Technology, 2009, pp. 1014-1024.
[111] Soška, J., Štemberk, P. : Environmental and Economic Optimization of Reinforced Concrete Cross-sections, In: 16. Betonářské dny 2009. Praha: ČBS Servis, s.r.o., 2009, pp. 463-468. (in Czech)
[112] Procházka, J., Štemberk, P. : Design Procedures for Reinforced Concrete Structures, 1. ed. Prague: CTU Press, 2009. 190 p.
[113] Procházka, J., Šmejkal, J., Štemberk, P. : Design of Discontinuity Regions in Concrete Structures with Strut-and-tie Models, In: Concrete and Concrete Structures. Žilina: Žilina University, 2009, pp. 269-275.
[114] Pokorná, N., Tomek, P., Štemberk, P. : Expressing Evolution of Stress-strain Diagram of Concrete During Solidification Using Fuzzy Sets, In: Enginnering Mechanics 2009 - CDROM [CD-ROM]. Prague: Institute of Theoretical and Applied Mechanics AS CR, 2009, pp. 1003-1009.
[115] Kruis, J., Štemberk, P. : Uncertainties in Engineering Problems Described by Fuzzy Sets, In: Seminar on Numerical Analysis, Modelling and Simulation of Challenging Engineering Problems. Ostrava: Institute of Geonics, Czech Academy of Science, 2009, pp. 1-14.
[116] Kohoutková, A., Pokorná, N., Štemberk, P. : Fuzzy-logic-based Stress-strain Curves for Fiber Concrete, In: The Proceedings on the First International Conference on Computational Technologies in Concrete Structures [CD-ROM]. Daejeon: Korea Advanced Institute of Science and Technology, 2009, pp. 956-965.
[117] Vraj, J., Štemberk, P. : Collapse Action of Prestressed Concrete, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 495-499.
[118] Štemberk, P., Frantová, M., Kohoutková, A. : Examples of Application of Fuzzy Logic in Civil Engineering Research, In: Automa. 2010, vol. 16, no. 6, pp. 54-57. (in Czech)
[119] Štemberk, P., Dewangan, N. P., Qureshi, M. F., Ramtekkar, G. D. : Sugeno-Fuzzy Modeling of Anomalies in Pressure Changes in Well-Aquifer System Excited by Rayleigh Waves, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 460-466.
[120] Štemberk, P., Berger-Vachon, Ch., Frantová, M., Broukalová, I., Sýkorová, J. (ed.) : Proceedings of the International Conference on Modelling and Simulation 2010 in Prague, Prague: Czech Technical University, 2010. 540 p.
[121] Stachová, P., Štemberk, P., Hejnic, F. : Use of STM for Assessment of Rigidity of Örnsköldsvik Bridge under Fatigue Loading, In: Proceedings of Workshop / Design of concrete structures using EN 1992-1-1. Prague: Czech Technical University, 2010, pp. 331-336.
[122] Stachová, P., Štemberk, P., Hejnic, F. : The Effect of the Cyclic Load on Örnsköldsvik Bridge, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 455-459.
[123] Silva, W. R. L., Prudencio Jr., L. R., Oliveira, A. L., Štemberk, P. : Alternative Concrete Composition Control Methodology for Ready Mixed Concrete Plants, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 403-407.
[124] Rainová, A., Štemberk, P. : Concrete Furniture and Concrete Interior Applications,
In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 369-373.
[125] Rainová, A., Štemberk, P. : Concrete Furniture and Concrete Interior Applications,
In: 11th National and 1st International Conference on Technological Trends [CD-ROM]. Trivandrum: College of Engineering Trivandrum, 2010, vol. 1, pp. 253-257.
[126] Pokorná, N., Štemberk, P. : Fuzzy Logic Model for Description of Fatigue Behavior of Concrete, In: Proceedings of 15th International Conference "Mechanika-2010". Kaunas: Kauno technologijos universitetas, 2010, pp. 351-355.
[127] Kuandykova, D., Štemberk, P. : Analysis of Support Zones of Reinforced Concrete Beam During Construction Using Strut-And-Tie Model, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 260-264.
[128] Kratochvíl, J., Malá, D., Štemberk, P., Reiterman, P. : Design and Construction of Concrete Canoe "Blue Lion", In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, pp. 256-259.
[129] Kalafutová, P., Reiterman, P., Štemberk, P. : Behaviour of early-age concrete and its modelling, In: Concrete Structures for Challenging Times. Praha: ČBS - Czech Concrete Society ČSSI, 2010, pp. 390-395.
[130] Hejnic, F., Štemberk, P. : Procedure of Casting Concrete Slab with Respect to Temperature and Shrinkage, In: Proceedings East West Fuzzy Colloquium 2010 / 17th Zittau Fuzzy Colloquim. Zittau: Hochschule Zittau/Görlitz, 2010, pp. 237-242.
[131] Hejnic, F., Štemberk, P. : Fuzzy Model for Fatigue of Concrete Including Chloride Penetration, In: 11th National and 1st International Conference on Technological Trends [CD-ROM]. Trivandrum: College of Engineering Trivandrum, 2010, vol. 1, pp. 322-326.
[132] Hanuš, V., Štemberk, P. : Welded Reinforcement Grids and their Applycability in Czech Environment, In: ENGINEERING MECHANICS 2010. Praha: Institute of Thermomechanics, Czech Academy of Science, 2010, pp. 37-52.
[133] Černý, P., Štemberk, P. : Optimization Design of Concrete Shells in The Philips Pavilion, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 61-66.
[134] Bruncvík, M., Čajánková, P., Štemberk, P. : Reinforced Concrete Structure Blast Load Resistance, In: Proceedings of the International Conference on Modelling and Simulation 2010 in Prague. Prague: Czech Technical University, 2010, vol. 1, pp. 44-52.
[135] Štemberk, P., Rainová, A. : Simulation of Hydration and Cracking Propagation with Temperature, In: Mechanika. 2011, vol. 17, no. 4, pp. 358-362.
[136] Štemberk, P., McLaughlin, D. : Determination of Transmission Length in Prestressed Concrete Sleeper Using Strut-and-Tie Model, In: Proceedings of 16th International Conference "Mechanika-2011". Kaunas: Kauno technologijos universitetas, 2011, pp. 287-292.
[137] Štemberk, P. : Application of Fuzzy Logic to Civil Engineering Problems, In: International Conference on Modeling and Simulation in Civil Engineering. New Delhi: Excel India Publishers, 2011, pp. 3-11.
[138] Sýkorová, J.,  Bártová, J., Štemberk, P. : Analysis of Prestressed Concrete Sleeper under Extreme Loading Conditions, In: Proceedings of 16th International Conference "Mechanika-2011". Kaunas: Kauno technologijos universitetas, 2011, pp. 282-286.
[139] Reiterman, P., Rainová, A., Kolář, K., Štemberk, P. : Non-traditional Concrete Elements with Aeshetical and Durability Requirements for Surface Layer, In: Metakaolin 2011. Brno: Brno Institute of Technology, 2011, pp. 65-70. (in Czech)
[140] Petřík, M., Štemberk, P. : Design and Realization of Experiment with Shaking Table, In: Proceedings of International Conference Optimization and Analysis of Structures 2011. Tartu: University of Tartu, 2011, pp. 25.
[141] Leal Da Silva, W., Schwerz de Lucena, D., Prudencio Jr., L. R., Štemberk, P. : Surface Appearance of Precast Elements Fabricated Using Self-Consolidating Concrete, In: Concrete International. 2011, vol. 33, no. 10, pp. 39-44.
[142] Kohoutková, A., Štemberk, P. : Application of Fuzzy Logic to Definition of Stress-strain Diagram of Hardening Concrete, In: International Conference on Modeling and Simulation in Civil Engineering. New Delhi: Excel India Publishers, 2011, pp. 285-291.
[143] Frantová, M., Štemberk, P., Vala, V. : Application of Strut-and-tie model on Eccentric Columns, In: Mechanika. 2011, vol. 17, no. 2, pp. 126-131.
[144] Bártová, J., Sýkorová, J., Štemberk, P. : Acceleration of Production of Prestressed Concrete Sleepers, In: Proceedings of 16th International Conference "Mechanika-2011". Kaunas: Kauno technologijos universitetas, 2011, pp. 40-45.
   

   

© Stemberk 20120